- Rs ba1 7610 update#
- Rs ba1 7610 manual#
The USB3 I/Q port was not yet functional when the test suite was run, but was tested functionally when Firmware V1.20 was released (Aug. The IC-7610 LAN port was tested functionally in my station with the Icom RS-BA1 suite.
The firmware will be updated to the following versions. differences (dual receivers and Digi-Sel tracking preselectors in the IC-7610). BE SURE to make a backup copy of your data settings to an SD card/USB flash drive before updating the firmware. Rs ba1 7610 manual#
Thoroughly read Section 6, SD CARD/USB FLASH DRIVE, in the BASIC MANUAL and the Section 13, UPDATING THE FIRMWARE, in the ADVANCED MANUAL, and follow the instructions displayed on the IC-7610 LCD screen. Rs ba1 7610 update#
To update from firmware version 1.05 or older to 1.11, the IC-7610 needs to have firmware version 1.06 installed. Refer to INFORMATION IC-7610 Version 1.30 for details. -The RS-BA1 Version 2 software will support the IC-7610's Scroll mode from its firmware Version 2.40. -While operating in the Data mode, the Receive Tone Control is deactivated. -The transceiver’s settings are now retained after updating the firmware. The dualwatch operation and dual spectrum scopes with the waterfall. - The Scope function of the RS-BA1 is improved. Incorporating the RS-BA1 Version 2 software, the RC-28v.2 comes complete with remote control USB encoder and will work with the IC-7100, IC-7200, IC-7300, IC-7410, IC-7600 & IC-9100 via USB, and with the IC-7610, IC-7700, IC-7800, IC-7850 & IC-7851 via an ethernet cable. 
- The Reference level of the Center mode scope screen while transmitting is fixed at set level independent of the user’s selection. - The Reference level is independently memorized for each band. - The number of FIX EDGE memories is expanded to 4. - A popup screen that displays when SPAN or EDGE is selected is added. -A Scroll mode that can seamlessly change the displayed scope range, depending on the operating frequency, is added.
0 kommentar(er)
